Displaying 1 to 51 (of 51 products)
Caliper rebuild kit - rear (43mm piston) consisting of one dust boot, pressure seal, lip seal, O-ring, parking brake actuator…
- Manufacturer
- Centric
- Model
- 143.61026
Centric Premium front 355x32mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 120.61089
Centric Premium rear 300x19mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 120.61087
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.46021
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.61041
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-1001
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-1001
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-1082
Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…
- Manufacturer
- Hawk
- Model
- 63-430-1001
Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…
- Manufacturer
- Hawk
- Model
- 63-430-1082
Hawk DTC-50 is a member of the Dynamic Torque Control race pad family with torque output significantly higher than DTC-60…
- Manufacturer
- Hawk
- Model
- 63-465-1001
Hawk DTC-50 is a member of the Dynamic Torque Control race pad family with torque output significantly higher than DTC-60…
- Manufacturer
- Hawk
- Model
- 63-465-1082
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-1001
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-1082
Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…
- Manufacturer
- Hawk
- Model
- 63-480-1001
Hawk DTC-80 is the newest and most extreme member of the Dynamic Torque Control race pad family, with the highest…
- Manufacturer
- Hawk
- Model
- 63-485-1001
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-1001
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-1082
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-1001
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-1082
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-1001
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-1082
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-1001
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-1082
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-1001
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-1082
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-1001
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-1082
Performance Friction 01 Race pads have very high average torque output, rising over its operating temperature range, and a MOT…
- Manufacturer
- Performance Friction
- Model
- 63-660-1001
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP1001-R4
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP1082-R4
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP1001-R4S
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP1082-R4S
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-1001
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-1082
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.61003
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.61501
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-1001
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-1082
StopTech Sport drilled left front 355x32mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.61089L
StopTech Sport drilled right front 355x32mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.61089R
StopTech Sport drilled left rear 300x19mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.61087L
StopTech Sport drilled right rear 300x19mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.61087R
StopTech Sport slotted & drilled left front 355x32mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.61089L
StopTech Sport slotted & drilled right front 355x32mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.61089R
StopTech Sport slotted & drilled left rear 300x19mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.61087L
StopTech Sport slotted & drilled right rear 300x19mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.61087R
StopTech Sport slotted left front 355x32mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.61089SL
StopTech Sport slotted right front 355x32mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.61089SR
StopTech Sport slotted left rear 300x19mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.61087SL
StopTech Sport slotted right rear 300x19mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.61087SR
Displaying 1 to 51 (of 51 products)