Displaying 1 to 27 (of 27 products)
Caliper rebuild kit - front (36mm pistons) consisting of 6 dust boots and pressure seals to rebuild one 6-piston caliper.…
- Manufacturer
- Centric
- Model
- 143.37023
Caliper rebuild kit - rear (44.5mm piston) consisting of one dust boot, pressure seal, O-ring, and rubber plug to rebuild…
- Manufacturer
- Centric
- Model
- 143.61038
Centric Premium High Carbon front 380x34mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.61116
Centric Premium High Carbon rear 330x25mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.61109
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-1792
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-1792
Ferodo DSUNO Race pads are based on the DS1.11 endurance pads, but with higher bite and slightly higher torque, trading…
- Manufacturer
- Ferodo
- Model
- 63-392-1792
Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…
- Manufacturer
- Hawk
- Model
- 63-430-1792
Hawk DTC-50 is a member of the Dynamic Torque Control race pad family with torque output significantly higher than DTC-60…
- Manufacturer
- Hawk
- Model
- 63-465-1792
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-1792
Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…
- Manufacturer
- Hawk
- Model
- 63-480-1792
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-1792
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-1792
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-1792
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-1793
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP1792-R4
Porterfield R4-E Endurance Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. Longer life than the…
- Manufacturer
- Porterfield
- Model
- AP1793-R4-E
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP1792-R4S
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP1793-R4S
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-1792
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.61021
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-1792
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-1793
StopTech Sport slotted left front 380x34mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.61116SL
StopTech Sport slotted right front 380x34mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.61116SR
StopTech Sport slotted left rear 330x25mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.61109SL
StopTech Sport slotted right rear 330x25mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.61109SR
Displaying 1 to 27 (of 27 products)